T/DB126/22 - Circular Saw and Diamond Wire Cutting Trials – RACE/UKAEA

UKAEA is researching remote cold cutting nuclear decommissioning size reduction technologies and has performed diamond wire saw (DWS) cutting trials on a specific, composite material component. UKAEA wants to gain additional information on the use of DWS technology, but also to investigate a second cold cutting technology - a circular saw (CS). UKAEA will provide targets to be cut using Commercial Off the Shelf (COTS) DWS and CS machines. The key points are: • The Contractor is to advise on the design (equipment, parameters) of the cutting trials • The Contractor is to provide all equipment and the facility for the trial • The Contractor is to conduct cutting trials and monitor various parameters (e.g., temperature) • The Contractor is to report on the trial and advise on Client’s final cutting system design • Cutting Targets (Targets) will be defined by UKAEA Through this process we are looking to open up engagement with suppliers to ensure there is sufficient production capability and capacity to meet project timelines and design requirements.

Services

17/08/2022 12:00:00

73000000-2  Research and development services and related consultancy servic
73100000-3  Research and experimental development services
73110000-6  Research services
73200000-4  Research and development consultancy services
73210000-7  Research consultancy services
73220000-0  Development consultancy services
73300000-5  Design and execution of research and development
98391000-0  Decommissioning services