[ExpireDate]: 10.10.2021
[ExternalReference]: 2021-546447
[FtsReference]: 2021-022380
[FtsS09F01PriorInformationNotice]
[Information]
[FtsS09F01PriorInformationNotice]
[NoticePin]
[Supplies]
[NoticeIsPriorInfoOnly]
[Section1]: [Ca]
I.1)
[NameAddressContact]
United Kingdom Atomic Energy Authority
N/A
Culham Science Centre
Abingdon
OX14 3DB
UK
[Contactpoint]:
Abigail Woods
[AddressPhone]:
+44 1235467082
[AddressEmail]:
abigail.woods@ukaea.uk
[Nutscode]:
UKJ14 -
Oxfordshire
[UrlBuyerprofile]:
https://uk.eu-supply.com/ctm/Company/CompanyInformation/Index/72814
I.3)
[InfoTendering]
[AddressObtainDocs]:
https://uk.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=39539&B=UK[AddressFurtherinfo]
[AsContactsAbove]:
I.4)
[CaType]
[MaintypePublicbody]
I.5)
[Mainactivity]
[OtherActivity]:
Fusion Research
[Section2]: [Object]
II.1)
[QuantityScopeContract]
II.1.1)
[TitleContract]
Superconducting Magnet
[Fileref]:
T/AW176/21
II.1.2)
[CpvMain]
31630000
-
II.1.3)
[TypeContract]
[Supplies]
II.1.4)
[DescrShort]
For an experimental setup, UKAEA wishes to procure a superconducting solenoid. One type of experiment performed with the solenoid will be field cooling of bulk superconductors.
The preference is for a conduction-cooled helium-free magnet.
The preference is for a conduction-cooled helium-free magnet.
II.1.5)
[ValueMagnitudeEstimatedTotal]
[ValueExclVat]: 150000.00
GBP
II.1.6)
[LotsInfo]
[DivisionLots]:
[No]
II.2)
[Description]
II.2.2)
[CpvAdditional]
31630000
-
II.2.3)
[PlacePerformance]
[Nutscode]:
UKJ14 -
Oxfordshire
II.2.4)
[DescrProcurement]
For an experimental setup, UKAEA wishes to procure a superconducting solenoid. One type of experiment performed with the solenoid will be field cooling of bulk superconductors.
The preference is for a conduction-cooled helium-free magnet.
The parameters of the solenoid are anticipated to be in the following range:
The field at the magnet centre is vertical
Access to the solenoid field is at room temperature via a re-entrant tail from beneath or above the cryostat.
Tail room temperature bore: 60-70 mm
The warm bore extends at least 50 or 60 mm above the solenoid mid plane, but as low as reasonably practicable
Peak field in bore: 6 T or up to 8 T maximum
Field homogeneity within a cylinder 10 mm long and 40 mm radius, centre coincident with that of the solenoid: ±0.5% or better
Sweep rate: zero to maximum field in 60 min or less
Persistence: to be decided
The experimental setup may require this magnet to be moved in horizontal and/or vertical direction while de-energised.
The scope of the delivery will include:
Magnet, cryostat and cold head assembly
Compressor and flexible lines
Power supply
Programmable magnet control system
Factory and site acceptance test
The preference is for a conduction-cooled helium-free magnet.
The parameters of the solenoid are anticipated to be in the following range:
The field at the magnet centre is vertical
Access to the solenoid field is at room temperature via a re-entrant tail from beneath or above the cryostat.
Tail room temperature bore: 60-70 mm
The warm bore extends at least 50 or 60 mm above the solenoid mid plane, but as low as reasonably practicable
Peak field in bore: 6 T or up to 8 T maximum
Field homogeneity within a cylinder 10 mm long and 40 mm radius, centre coincident with that of the solenoid: ±0.5% or better
Sweep rate: zero to maximum field in 60 min or less
Persistence: to be decided
The experimental setup may require this magnet to be moved in horizontal and/or vertical direction while de-energised.
The scope of the delivery will include:
Magnet, cryostat and cold head assembly
Compressor and flexible lines
Power supply
Programmable magnet control system
Factory and site acceptance test
II.3)
[DateOfContractNotice]:
11.10.2021
[Section4]: [Procedure]
IV.1)
[Description]
IV.1.8)
[GpaInfo]
[GpaCovered]
: [No]
IV.2)