United Kingdom Atomic Energy Authority

N/A

Culham Science Centre

Abingdon

OX14 3DB

UK

Persona de contacto: Vincent Tsang

Teléfono: +44 1235466444

Correo electrónico: vincent.tsang@ukaea.uk

Dirección principal: http://www.gov.uk/government/organisations/uk-atomic-energy-authority

Dirección del perfil de comprador: https://uk.eu-supply.com/ctm/Company/CompanyInformation/Index/72814

Puede obtenerse más información en

la dirección mencionada arriba:  

Organismo de Derecho público

Otra actividad:  Fusion Research

STEP WP5 - Lead-Lithium Flow Loop Design Package

Número de referencia:  T/VT117/19

As part of a UK national programme (the STEP Programme), UKAEA are requesting a design for a Lead-Lithium flow loop with several key requirements. In this project, the successful applicant will work with UKAEA to carry out the preliminary design for a Lead-Lithium Flow Loop.

As part of a UK national programme (the STEP Programme), UKAEA are requesting a design for a Lead-Lithium flow loop with several key requirements. In this project, the successful applicant will work with UKAEA to carry out the preliminary design for a Lead-Lithium Flow Loop.
Liquid Lead-Lithium has been considered as a blanket coolant by multiple fusion organisations due to its high boiling point temperature, tritium breeding capabilities and thermal properties. To develop further understanding in the United Kingdom, UKAEA intends to award a Front-End Engineering Design contract for a Lead-Lithium flow loop which can investigate fluid properties and flow behaviour in representative blanket conditions.
The main aims of the flow loop are to study the effects of a uniform magnetic field on flowing Lead-Lithium and measure corrosion within a defined test section. The test section will allow different materials and geometries of piping to be installed and tested.

UKAEA invites initial Expressions of Interest from engineering firms, consultancy groups and academia.
The Lead-Lithium design package is to be issued for tender in October 2019 with work to be completed by March 2020 with one identified Consultant.