II.1)
Scope of the procurement
Provision of the Skills Bootcamps - Wave 3 - Category 4 Engineering and Manufacturing Technologies and Vehicle operations
Reference number:
57101
80000000
-
Education and training services
Services
II.1.4)
Short description
The scope of this project is to seek one or more service providers to deliver 8 separate specialist technical skilled bootcamps, under Category 4 - Engineering, Manufacturing Technologies and Vehicle Operations of the Learning & Teaching DPS. The eight Skills Bootcamp programmes are as follows:F Gas Accredited Heat Pump Engineer, Monobloc Accredited Heat Pump Engineer, Advanced Fibre Engineer, EV Charging Point Installation Vehicle Compliance Specialist,Tech Safe Green Standard, Professional Diagnostic Development, Advanced Manufacturing. The Service Provider(s) shall be expected to deliver high quality flexible training programmes to address the needs of adults aged 19+. Delivery is based at level 3 – 5 with a maximum delivery of 16 weeks and a minimum of 60 Guided Learning Hours (GLH) based on employer sector demand.
II.1.6)
Information about lots
This contract is divided into lots:
yes
II.1.7)
Total value of the procurement
Value excluding VAT:
763490.00
GBP
F Gas Accredited Heat Pump Engineer bootcamp training
Lot No:
1
II.2.2)
Additional CPV code(s)
80000000
-
Education and training services
II.2.3)
Place of performance
NUTS code:
UKE11 -
Kingston upon Hull, City of
Main site or place of performance:
Hull & East Yorkshire boundaries
II.2.4)
Description of the procurement
The scope of this project is to seek one or more service providers to deliver 8 separate specialist technical skilled bootcamps, under Category 4 - Engineering, Manufacturing Technologies and Vehicle Operations Hull City Council's Learning & Teaching DPS. The eight Skills Bootcamp programmes are as follows: F Gas Accredited Heat Pump Engineer Monobloc Accredited Heat Pump Engineer Advanced Fibre Engineer EV Charging Point Installation Vehicle Compliance Specialist Tech Safe Green Standard Professional Diagnostic Development Advanced Manufacturing The Service Provider(s) shall be expected to deliver high quality flexible training programmes to address the needs of adults aged 19+. Delivery is based at level 3 – 5 with a maximum delivery of 16 weeks and a minimum of 60 Guided Learning Hours (GLH) based on employer sector demand. All learning must be instructed under the guidance of a lecturer, supervisor tutor or appropriate provider of education and training whilst on the skills bootcamps. All projects must demonstrate extensive evidence of employer involvement in the design of their delivery of their skills Bootcamps.
Criteria below
Quality criterion
-
Name:
Relevant Experience
/
Weighting:
10%
Quality criterion
-
Name:
Delivery Methodology
/
Weighting:
20%
Quality criterion
-
Name:
Local Employer Engagement
/
Weighting:
30%
Quality criterion
-
Name:
Social Value
/
Weighting:
10%
Price
-
Weighting:
30%
II.2.11)
Information about options
Options:
no
II.2.13)
Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
no
II.2.14)
Additional information
Department of Education (DFE) funding
Monobloc Accredited Heat Pump Engineer bootcamp training
Lot No:
2
II.2.2)
Additional CPV code(s)
80000000
-
Education and training services
II.2.3)
Place of performance
NUTS code:
UKE11 -
Kingston upon Hull, City of
Main site or place of performance:
Hull & East Yorkshire boundaries
II.2.4)
Description of the procurement
The scope of this project is to seek one or more service providers to deliver 8 separate specialist technical skilled bootcamps, under Category 4 - Engineering, Manufacturing Technologies and Vehicle Operations Hull City Council's Learning & Teaching DPS. The eight Skills Bootcamp programmes are as follows: F Gas Accredited Heat Pump Engineer Monobloc Accredited Heat Pump Engineer Advanced Fibre Engineer EV Charging Point Installation Vehicle Compliance Specialist Tech Safe Green Standard Professional Diagnostic Development Advanced Manufacturing The Service Provider(s) shall be expected to deliver high quality flexible training programmes to address the needs of adults aged 19+. Delivery is based at level 3 – 5 with a maximum delivery of 16 weeks and a minimum of 60 Guided Learning Hours (GLH) based on employer sector demand. All learning must be instructed under the guidance of a lecturer, supervisor tutor or appropriate provider of education and training whilst on the skills bootcamps. All projects must demonstrate extensive evidence of employer involvement in the design of their delivery of their skills Bootcamps.
Criteria below
Quality criterion
-
Name:
Relevant Experience
/
Weighting:
10%
Quality criterion
-
Name:
Delivery Methodology
/
Weighting:
20%
Quality criterion
-
Name:
Local Employer Engagement
/
Weighting:
30%
Quality criterion
-
Name:
Social Value
/
Weighting:
10%
Price
-
Weighting:
30%
II.2.11)
Information about options
Options:
no
II.2.13)
Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
no
II.2.14)
Additional information
Department of Education (DFE) funding
Advanced Fibre Engineer Bootcamp training
Lot No:
3
II.2.2)
Additional CPV code(s)
80000000
-
Education and training services
II.2.3)
Place of performance
NUTS code:
UKE1 -
East Yorkshire and Northern Lincolnshire
Main site or place of performance:
Hull & East Yorkshire boundaries
II.2.4)
Description of the procurement
The scope of this project is to seek one or more service providers to deliver 8 separate specialist technical skilled bootcamps, under Category 4 - Engineering, Manufacturing Technologies and Vehicle Operations Hull City Council's Learning & Teaching DPS. The eight Skills Bootcamp programmes are as follows: F Gas Accredited Heat Pump Engineer Monobloc Accredited Heat Pump Engineer Advanced Fibre Engineer EV Charging Point Installation Vehicle Compliance Specialist Tech Safe Green Standard Professional Diagnostic Development Advanced Manufacturing The Service Provider(s) shall be expected to deliver high quality flexible training programmes to address the needs of adults aged 19+. Delivery is based at level 3 – 5 with a maximum delivery of 16 weeks and a minimum of 60 Guided Learning Hours (GLH) based on employer sector demand. All learning must be instructed under the guidance of a lecturer, supervisor tutor or appropriate provider of education and training whilst on the skills bootcamps. All projects must demonstrate extensive evidence of employer involvement in the design of their delivery of their skills Bootcamps.
Criteria below
Quality criterion
-
Name:
Relevant Experience
/
Weighting:
10%
Quality criterion
-
Name:
Delivery Methodology
/
Weighting:
20%
Quality criterion
-
Name:
Local Employer Engagement
/
Weighting:
30%
Quality criterion
-
Name:
Social Vaue
/
Weighting:
10%
Price
-
Weighting:
30%
II.2.11)
Information about options
Options:
no
II.2.13)
Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
no
II.2.14)
Additional information
Department of Education (DFE) funding
EV Charging Point Installations bootcamp training
Lot No:
4
II.2.2)
Additional CPV code(s)
80000000
-
Education and training services
II.2.3)
Place of performance
NUTS code:
UKE1 -
East Yorkshire and Northern Lincolnshire
Main site or place of performance:
Hull & East Yorkshire boundaries
II.2.4)
Description of the procurement
The scope of this project is to seek one or more service providers to deliver 8 separate specialist technical skilled bootcamps, under Category 4 - Engineering, Manufacturing Technologies and Vehicle Operations Hull City Council's Learning & Teaching DPS. The eight Skills Bootcamp programmes are as follows: F Gas Accredited Heat Pump Engineer Monobloc Accredited Heat Pump Engineer Advanced Fibre Engineer EV Charging Point Installation Vehicle Compliance Specialist Tech Safe Green Standard Professional Diagnostic Development Advanced Manufacturing The Service Provider(s) shall be expected to deliver high quality flexible training programmes to address the needs of adults aged 19+. Delivery is based at level 3 – 5 with a maximum delivery of 16 weeks and a minimum of 60 Guided Learning Hours (GLH) based on employer sector demand. All learning must be instructed under the guidance of a lecturer, supervisor tutor or appropriate provider of education and training whilst on the skills bootcamps. All projects must demonstrate extensive evidence of employer involvement in the design of their delivery of their skills Bootcamps.
Criteria below
Quality criterion
-
Name:
Relevant Experience
/
Weighting:
10%
Quality criterion
-
Name:
Delivery Methodology
/
Weighting:
20%
Quality criterion
-
Name:
Local Employer Engagement
/
Weighting:
30%
Quality criterion
-
Name:
Social Value
/
Weighting:
10%
Price
-
Weighting:
30%
II.2.11)
Information about options
Options:
no
II.2.13)
Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
no
II.2.14)
Additional information
Lot 4 - Received no bids therefore no Contract was awarded for this Service
Vehicle Compliance Specialist bootcamp training
Lot No:
5
II.2.2)
Additional CPV code(s)
80000000
-
Education and training services
II.2.3)
Place of performance
NUTS code:
UKE1 -
East Yorkshire and Northern Lincolnshire
Main site or place of performance:
Hull & East Yorkshire boundaries
II.2.4)
Description of the procurement
The scope of this project is to seek one or more service providers to deliver 8 separate specialist technical skilled bootcamps, under Category 4 - Engineering, Manufacturing Technologies and Vehicle Operations Hull City Council's Learning & Teaching DPS. The eight Skills Bootcamp programmes are as follows: F Gas Accredited Heat Pump Engineer Monobloc Accredited Heat Pump Engineer Advanced Fibre Engineer EV Charging Point Installation Vehicle Compliance Specialist Tech Safe Green Standard Professional Diagnostic Development Advanced Manufacturing The Service Provider(s) shall be expected to deliver high quality flexible training programmes to address the needs of adults aged 19+. Delivery is based at level 3 – 5 with a maximum delivery of 16 weeks and a minimum of 60 Guided Learning Hours (GLH) based on employer sector demand. All learning must be instructed under the guidance of a lecturer, supervisor tutor or appropriate provider of education and training whilst on the skills bootcamps. All projects must demonstrate extensive evidence of employer involvement in the design of their delivery of their skills Bootcamps.
Criteria below
Quality criterion
-
Name:
Relevant Experence
/
Weighting:
10%
Quality criterion
-
Name:
Delivery Methodology
/
Weighting:
20%
Quality criterion
-
Name:
Local Employer Engagement
/
Weighting:
30%
Quality criterion
-
Name:
Social Value
/
Weighting:
10%
Price
-
Weighting:
30%
II.2.11)
Information about options
Options:
no
II.2.13)
Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
no
II.2.14)
Additional information
Department of Education (DFE) funding
Tech Safe Green Standard bootcamp training
Lot No:
6
II.2.2)
Additional CPV code(s)
80000000
-
Education and training services
II.2.3)
Place of performance
NUTS code:
UKE1 -
East Yorkshire and Northern Lincolnshire
Main site or place of performance:
Hull & East Yorkshire boundaries
II.2.4)
Description of the procurement
The scope of this project is to seek one or more service providers to deliver 8 separate specialist technical skilled bootcamps, under Category 4 - Engineering, Manufacturing Technologies and Vehicle Operations Hull City Council's Learning & Teaching DPS. The eight Skills Bootcamp programmes are as follows: F Gas Accredited Heat Pump Engineer Monobloc Accredited Heat Pump Engineer Advanced Fibre Engineer EV Charging Point Installation Vehicle Compliance Specialist Tech Safe Green Standard Professional Diagnostic Development Advanced Manufacturing The Service Provider(s) shall be expected to deliver high quality flexible training programmes to address the needs of adults aged 19+. Delivery is based at level 3 – 5 with a maximum delivery of 16 weeks and a minimum of 60 Guided Learning Hours (GLH) based on employer sector demand. All learning must be instructed under the guidance of a lecturer, supervisor tutor or appropriate provider of education and training whilst on the skills bootcamps. All projects must demonstrate extensive evidence of employer involvement in the design of their delivery of their skills Bootcamps.
Criteria below
Quality criterion
-
Name:
Relevant Experience
/
Weighting:
10%
Quality criterion
-
Name:
Delivery Methodology
/
Weighting:
20%
Quality criterion
-
Name:
Local Employer Engagement
/
Weighting:
30%
Quality criterion
-
Name:
Social Value
/
Weighting:
10%
Price
-
Weighting:
30%
II.2.11)
Information about options
Options:
no
II.2.13)
Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
no
II.2.14)
Additional information
Department of Education (DFE) funding
Professional Diagnostic Development bootcamp training
Lot No:
7
II.2.2)
Additional CPV code(s)
80000000
-
Education and training services
II.2.3)
Place of performance
NUTS code:
UKE1 -
East Yorkshire and Northern Lincolnshire
Main site or place of performance:
Hull & East Yorkshire boundaries
II.2.4)
Description of the procurement
The scope of this project is to seek one or more service providers to deliver 8 separate specialist technical skilled bootcamps, under Category 4 - Engineering, Manufacturing Technologies and Vehicle Operations Hull City Council's Learning & Teaching DPS. The eight Skills Bootcamp programmes are as follows: F Gas Accredited Heat Pump Engineer Monobloc Accredited Heat Pump Engineer Advanced Fibre Engineer EV Charging Point Installation Vehicle Compliance Specialist Tech Safe Green Standard Professional Diagnostic Development Advanced Manufacturing The Service Provider(s) shall be expected to deliver high quality flexible training programmes to address the needs of adults aged 19+. Delivery is based at level 3 – 5 with a maximum delivery of 16 weeks and a minimum of 60 Guided Learning Hours (GLH) based on employer sector demand. All learning must be instructed under the guidance of a lecturer, supervisor tutor or appropriate provider of education and training whilst on the skills bootcamps. All projects must demonstrate extensive evidence of employer involvement in the design of their delivery of their skills Bootcamps.
Criteria below
Quality criterion
-
Name:
Relevant Experience
/
Weighting:
10%
Quality criterion
-
Name:
Delivery Methodology
/
Weighting:
20%
Quality criterion
-
Name:
Local Employer Engagement
/
Weighting:
30%
Quality criterion
-
Name:
Social Value
/
Weighting:
10%
Price
-
Weighting:
30%
II.2.11)
Information about options
Options:
no
II.2.13)
Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
no
II.2.14)
Additional information
Department of Education (DFE) funding
Advanced Manufacturing bootcamp training
Lot No:
8
II.2.2)
Additional CPV code(s)
80000000
-
Education and training services
II.2.3)
Place of performance
NUTS code:
UKE1 -
East Yorkshire and Northern Lincolnshire
Main site or place of performance:
Hull & East Yorkshire boundaries
II.2.4)
Description of the procurement
The scope of this project is to seek one or more service providers to deliver 8 separate specialist technical skilled bootcamps, under Category 4 - Engineering, Manufacturing Technologies and Vehicle Operations Hull City Council's Learning & Teaching DPS. The eight Skills Bootcamp programmes are as follows: F Gas Accredited Heat Pump Engineer Monobloc Accredited Heat Pump Engineer Advanced Fibre Engineer EV Charging Point Installation Vehicle Compliance Specialist Tech Safe Green Standard Professional Diagnostic Development Advanced Manufacturing The Service Provider(s) shall be expected to deliver high quality flexible training programmes to address the needs of adults aged 19+. Delivery is based at level 3 – 5 with a maximum delivery of 16 weeks and a minimum of 60 Guided Learning Hours (GLH) based on employer sector demand. All learning must be instructed under the guidance of a lecturer, supervisor tutor or appropriate provider of education and training whilst on the skills bootcamps. All projects must demonstrate extensive evidence of employer involvement in the design of their delivery of their skills Bootcamps.
Criteria below
Quality criterion
-
Name:
Relevant Experience
/
Weighting:
10%
Quality criterion
-
Name:
Delivery Methodology
/
Weighting:
20%
Quality criterion
-
Name:
Local Employer Engagement
/
Weighting:
30%
Quality criterion
-
Name:
Social Value
/
Weighting:
10%
Price
-
Weighting:
30%
II.2.11)
Information about options
Options:
no
II.2.13)
Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
no
II.2.14)
Additional information
Department of Education (DFE) funding