Contract notice

Information

Published

Date of dispatch of this notice: 24/11/2020

Expire date: 11/01/2021

External Reference: 2020-565308

TED Reference: 2020/S 232-573865

Contract notice

Contract notice

Directive 2014/24/EU

Section I: Contracting authority

I.1)

Name and addresses

United Kingdom Atomic Energy Authority
N/A
Culham Science Centre
Abingdon
OX14 3DB
UK
Contact person: Phil Perkins
Telephone: +44 1235467147
Internet address(es):
I.3)

Communication

The procurement documents are available for unrestricted and full direct access, free of charge, at:  
https://uk.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=35592&B=UK
Additional information can be obtained from
the abovementioned address:  
Tenders or requests to participate must be submitted
Tenders or requests to participate must be submitted
to the abovementioned address
I.4)

Type of the contracting authority

Body governed by public law
I.5)

Main activity

Other activity:  Fusion Research

Section II: Object

II.1)

Scope of the procurement

II.1.1)

Title

Supply, Installation and Commissioning of Robotic Manipulator Arm(s) at RACE Facility, UK
Reference number:  T/RHH068/20
II.1.2)

Main CPV code

42997300  -  Industrial robots
II.1.3)

Type of contract

Supplies
II.1.4)

Short description

UKAEA wishes to procure, on behalf of RACE, up to three haptic dextrous manipulators, complete with Electrical and Controls Systems, to deliver key aspects of a research & training programme. The scope includes supply, installation, commissioning of the manipulators at a Facility in the UK and training of operators.
Whilst the manipulators that are the subject of this procurement are not intended for deployment in nuclear environments, it is essential that devices offered are suited to such an environment to ensure the validity of the research & training programme. Therefore the manipulators must be representative of devices that may be deployed in high radiation and contamination environments.
II.1.5)

Estimated total value

Value excluding VAT: 3600000.00  GBP
II.1.6)

Information about lots

This contract is divided into lots: no
II.2)

Description

II.2.2)

Additional CPV code(s)

31211110  -  Control panels
32441200  -  Telemetry and control equipment
71334000  -  Mechanical and electrical engineering services
II.2.4)

Description of the procurement

UKAEA wishes to procure, on behalf of RACE, up to three haptic dextrous manipulators, complete with Electrical and Controls Systems, to deliver key aspects of a research & training programme. The scope includes supply, installation, commissioning of the manipulators at a Facility in the UK and training of operators.
Whilst the manipulators that are the subject of this procurement are not intended for deployment in nuclear environments, it is essential that devices offered are suited to such an environment to ensure the validity of the research & training programme. Therefore the manipulators must be representative of devices that may be deployed in high radiation and contamination environments.
II.2.5)

Award criteria

Price is not the only award criterion and all criteria are stated only in the procurement documents
II.2.6)

Estimated value

Value excluding VAT: 3600000.00  GBP
II.2.7)

Duration of the contract, framework agreement or dynamic purchasing system

Duration in months: 12
This contract is subject to renewal: no
II.2.10)

Information about variants

Variants will be accepted: no
II.2.11)

Information about options

Options: no
II.2.13)

Information about European Union funds

The procurement is related to a project and/or programme financed by European Union funds: no

Section III: Legal, economic, financial and technical information

III.1)

Conditions for participation

III.1.1)

Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers

List and brief description of conditions:  Refer to Procurement Documents for information.
III.1.2)

Economic and financial standing

List and brief description of selection criteria:  
Refer to Procurement Documents for information.
Minimum level(s) of standards possibly required:  
Refer to Procurement Documents for information.
III.1.3)

Technical and professional ability

List and brief description of selection criteria:  
Refer to Procurement Documents for information.
Minimum level(s) of standards possibly required:  
Refer to Procurement Documents for information.
III.2)

Conditions related to the contract

III.2.2)

Contract performance conditions

Refer to Procurement Documents for information.

Section IV: Procedure

IV.1)

Description

IV.1.1)

Type of procedure

Competitive procedure with negotiation
IV.1.4)

Information about reduction of the number of solutions or tenders during negotiation or dialogue

Recourse to staged procedure to gradually reduce the number of solutions to be discussed or tenders to be negotiated
IV.1.5)

Information about negotiation

The contracting authority reserves the right to award the contract on the basis of the initial tenders without conducting negotiations
IV.1.8)

Information about the Government Procurement Agreement (GPA)

The procurement is covered by the Government Procurement Agreement : yes
IV.2)

Administrative information

IV.2.1)

Previous publication concerning this procedure

Notice number in the OJ S: 2020/S 144-355934
IV.2.2)

Time limit for receipt of tenders or requests to participate

Date:  04/01/2021
Local time:  12:00
IV.2.3)

Estimated date of dispatch of invitations to tender or to participate to selected candidates

Date: 05/01/2021
IV.2.4)

Languages in which tenders or requests to participate may be submitted

English
IV.2.6)

Minimum time frame during which the tenderer must maintain the tender

Tender must be valid until:  24/05/2021

Section VI: Complementary information

VI.1)

Information about recurrence

This is a recurrent procurement:  no
VI.2)

Information about electronic workflows

Electronic ordering will be used
Electronic invoicing will be accepted
Electronic payment will be used
VI.4)

Procedures for review

VI.4.1)

Review body

UK Atomic Energy Authority
Culham Science Centre
Abingdon
OX14 3DB
UK

VI.4.2)

Body responsible for mediation procedures

UK Atomic Energy Authority
Culham Science Centre
Abingdon
OX14 3DB
UK

VI.4.3)

Review procedure

Precise information on deadline(s) for review procedures: 
VI.4.2)Body responsible for mediation procedures
VI.4.3)Review procedure
Precise information on deadline(s) for review procedures:
The authority will incorporate a minimum 10 calendar day standstill period at the point information on the award of the contract is communicated to tenderers.
This period allows unsuccessful tenderers to seek further debriefing from the authority before a contract is entered into applicants have 2 working days from the notification of the award decision to request. Additional debriefing and that information have to be provided within a minimum of 3 working days before the expiry of the standstill period. Such additional information should be sought from the contact named in this notice.
If an appeal regarding the award of a contract has not been successfully resolved, the Public Contracts Regulations 2015 (SI 2015 No. 102) provide for aggrieved parties who have been harmed or are at risk of harm by a breach of the rules to take action in the High Court (England, Wales and Northern Ireland).
Any such action must be brought promptly.
(generally within 3 months).
VI.4.4)

Service from which information about the review procedure may be obtained

UK Atomic Energy Authority
Culham Science Centre
Abingdon
OX14 3DB
UK